CDS 101/110 - Loop Analysis

From MurrayWiki
Jump to: navigation, search
CDS 101/110a Schedule Recitations FAQ ()

Overview

The learning objectives for this week are:

  • Students should be able to draw a Nyquist curve and use the Nyquist criterion to determine stability
  • Students should be able to compute the gain a phase margin for a system using Nyquist and Bode plots

Monday: Stability of Feedback Systems (Slides, MP3)

This lecture describes how to analyze the stability and performance of a feedback system by looking at the open loop transfer function. We introduce the Nyquist criteria for stability and talk about the gain and phase margin as measures of robustness. The cruise control system is used as an example throughout the lecture.

Wednesday: Nyquist Analysis (Notes, MP3)

In this lecture we will derive the Nyquist criterion using the principle of the argument and show how to apply it to determine stability of a closed loop system. We will also see how to account for right half plane poles in the open loop transfer function. Finally, we will give a brief introduction to time delay and its effects on stability.

Friday: recitations

Reading

  • K. J. Åström and R. M. Murray,, Princeton University Press, 2008..
    • CDS 101: Read sections 9.1-9.3, skipping advanced subsetions [45 min]
    • CDS 110: Read sections 9.1-9.3 [60 min]
    • CDS 210: Review AM08 Ch 9.1-9.3, read AM08 9.4-.5, DFT Ch 3 [90 min]

Homework

  • Homework #6 (due 17 Nov 08): CDS 101, CDS 110, CDS 210
  • Useful MATLAB commands
    • tf - generate a transfer function from numerator/denominator coefficients
    • nyquist - generate a Nyquist plot for an open loop system L(s)
    • amnyquist - same as Nyquist, but sometimes does a better job with arrows
    • margin - generate a bode plot with gain and phase margin

FAQ

Monday

Wednesday

Homework