1-23 | 25 | In Section 1.8, breaking should be braking | Version 3.0h | Closed |

1-23 | 7 | In Section 1.7, there is a typo/missing word near the end of the section | Version 3.0h | Closed |

1-23 | 7 | In the air-fuel example in Section 1.8, missing reference to Figure 1.16b | Version 3.0h | Closed |

1-25 | 8 | In the paper mill description in Section 1.8, "production unit" should be "production units" | Version 3.0h | Closed |

1-25 | 8 | In Section 1.8 text on paper mills, "production unit" should be "production units" | Version 3.0h | Closed |

10-2 | -8 | In Section 10.1, there is a typo in the oscillation condition equation | Version 3.0h | Closed |

10-2 | -8 | In Equation 10.1, there's a typo 0 instead of ')' | Version 3.0h | Duplicate |

10-3 | -7 | In Section 10.1, the word "circuit" is misspelled. | Version 3.0h | Closed |

11-12 | 8 | Ziegler-Nichols tuning rules don't quite match the original gains from the Ziegler-Nichols paper | Version 3.0j | Closed |

11-13 | 22, 23 | Updated tuning rules are incorrect in equation (11.10b) | Version 3.0j | Closed |

11-13 | 22, 23 | Original Ziegler-Nichols gains listed after improved tuning rules are incorrect | Version 3.0j | Closed |

11-5 | 19 | In Section 11.1, the word "frequencies" is duplicated | Version 3.0h | Closed |

12-10 | -1 | In Section 12.2, there is a typo in the equation for P^+(s) | Version 3.0h | Closed |

12-10 | 1 | In Section 12.2, there is a singular vs. plural error when talking about the control signal | Version 3.0h | Closed |

12-11 | -4 | In Section 12.2, the word "inherently" is misspelled | Version 3.0h | Closed |

12-11 | -4 | In Section 12.2, the sentence about sensitivity to model uncertainty has a grammatical issue | Version 3.0h | Closed |

12-11 | 2 | In Section 12.2, there is a typo in the equation for the approximate inverse of P(s) | Version 3.0h | Closed |

12-14 | -5 | In Section 12.3, there is a missing space | Version 3.0h | Closed |

12-16 | 11 | In Section 12.4, the word "limitations" is misspelled | Version 3.0h | Closed |

12-3 | -14 | In Section 12.1, the additional transfer functions for the F != 1 case seem to be incorrect | Version 3.0h | Closed |

12-30 | 18 | In Section 12.6, a sentence in Theorem 12.2 is grammatically incorrect | Version 3.0h | Closed |

12-35 | 11 | In Section 12.7, there's a grammatical error where it talks about the closed loop system H i | Version 3.0h | Closed |

12-35 | 4 | In Section 12.7, there's a typo in the discussion of inner/outer loop design | Version 3.0h | Closed |

12-4 | -5 | In Section 12.1, the vector w corresponding to Fig. 12.1 seems to be incorrect | Version 3.0h | Closed |

12-5 | -3 | In Section 12.2, the word "desired" is misspelled | Version 3.0h | Closed |

12-6 | 17 | In Section 12.2, the condition for Gyv being small seems to be misstated | Version 3.0h | Closed |

13-15 | 10 | In Section 13.3, the word "response" is duplicated | Version 3.0h | Closed |

13-6 | -11 | In Section 13.2, the word "when" is incorrectly capitalized | Version 3.0h | Closed |

13-7 | 8 | In Section 13.2, there's a grammatical issue in the discussion of system stability | Version 3.0h | Closed |

13-7 | 9 | In Section 13.2, the word "transfer" is misspelled | Version 3.0h | Closed |

13-7 | 9 | In Section 13.2, the word "point" is duplicated | Version 3.0h | Closed |

13-8 | -9 | In Example 13.6 (Vinnicombe metric), the formula for conjugate point is missing a minus sign | Version 3.0j | Closed |

2-11 | 19 | In discussion on PI control in Section 2.2, incorrect formula for G yv when \omega is small | Version 3.0h | Closed |

2-2 | 37 | In Section 2.1, there is a typo in the discussion of solving for an exponential input | Version 3.0h | Closed |

2-4 | 9 | In Section 2.1, referred is misspelled | Version 3.0h | Closed |

2-5 | 5 | In Example 6.8, signalsith should be signals with | Version 3.0h | Closed |

2-7 | -12 | Equation (2.11) has the wrong formula for the transfer function | Version 3.0h | Duplicate |

2-7 | 9 | Equation 2.11 is not equal to the preceding expression from which it came | Version 3.0h | Closed |

2-8 | 12 | In Section 2.2, one too many parentheses in an expression for y(t) | Version 3.0h | Closed |

2-8 | 15 | Display equation above equation (2.12) has extra set of parentheses | Version 3.0h | Closed |

2-9 | 13 | In discussion of proportional control in Section 2.2, missing v 0 in displayed equation | Version 3.0h | Closed |

3-10 | -8 | In discussion on algebraic loops in Section 3.2, there is an extra "be" | Version 3.0h | Closed |

3-10 | 33 | In Section 3.1, there is a typo for plurality | Version 3.0h | Closed |

3-17 | -2 | After Example 3.4, difference equation should be difference equations | Version 3.0h | Closed |

3-2 | -3 | In Section 3.2, "stiction" should be "friction" | Version 3.0h | Rejected |

3-20 | -15 | In Section 3.2, just before Simulation and Analysis subsection, "different" should be "difference" | Version 3.0h | Closed |

3-3 | 12 | In Section 3.2, missing space after a period in description of phase portraits | Version 3.0h | Duplicate |

3-31 | 11 | Demoninator of equation (3.27) should be r c | Version 3.0j | Closed |

4-4 | 5 | Caption of Figure 4.3 has grammatical error | Version 3.0h | Closed |

5-13 | 8 | Theorem 5.1 has an extra "all" | Version 3.0h | Closed |

5-15 | 2 | In caption for Figure 5.11, "nonlinear systems" should be "nonlinear system" | Version 3.0h | Closed |

5-18 | -10 | Missing space in the statement of Theorem 5.2 | Version 3.0h | Closed |

5-23 | 13 | In Example 5.11, extra "a" in description of P | Version 3.0h | Closed |

5-24 | -4 | In description of Krasovskiâ€“Lasalle invariance principle, "only" is repeated | Version 3.0h | Closed |

5-26 | -3 | At the end of Example 5.12, "dynamics ... evolve" should be "dynamics evolve" | Version 3.0h | Closed |

6-25 | 15 | After Example 6.8, reference to equation (6.20) should be equation (6.24) | Version 3.0h | Closed |

6-27 | 30 | In Section 6.3, there is a discrepancy between variables for discrete/continuous | Version 3.0h | Closed |

6-36 | 2 | In Problem 6.8, discrete time system does not progress | Version 3.0h | Closed |

6-6 | 12 | In the initial condition response portion of Section 3.2, there is an extra "show" | Version 3.0h | Closed |

7-3 | 14 | In Equation 7.2, dot is over the subscript | Version 3.0h | Rejected |

7-34 | 12 | In Exercise 7.12, it refers to 'Exercise ??.' | Version 3.0h | Closed |

9-14 | 14 | In Section 9.3 there's a misspelling | Version 3.0h | Closed |

9-15 | 16 | In Section 9.3 there are equations that use the variable 'n' when it should be 'w' | Version 3.0h | Closed |

9-16 | 5 | In Section 9.3 there's a missing comma | Version 3.0h | Closed |

9-2 | 20 | In Section 9.1 there's a typo where it talks about Laplace transforms | Version 3.0h | Closed |

9-23 | -4 | In Section 9.4 there's a sentence with an extra word | Version 3.0h | Closed |

9-23 | 12 | In Section 9.4 there's a sentence with a grammar issue | Version 3.0h | Closed |