CS-EE-ME 75 Fall 2010 Final Report
|CS/EE/ME 75||Organization||Schedule||Team wiki||Public site|
|R. Murray||Issued: 3 Dec, noon|
|CS/EE/ME 75, Fall 2010||Due: 10 Dec, 5 pm|
Each student must turn in a final report documenting their work for CS/EE/ME 75a. Your final report consists of two parts:
- User page: Your user page on the wiki should have a picture and short bio at the top of the page, followed by a listing of the teams and subsystems that you are a member of (with links to the appropriate wiki pages). In a section titled "Fall 2010 Activities", you should describe in words what work you participated in over the course of the term. You do not need to include information from homework sets that was not related to the team or subsystem that you were part of.
- Note: Recall from HW #4 that your homework responses should be in a separate section at the bottom of your user page. This section will be deleted after HW #4 is graded, so make sure to replicate any information that is contained there someplace else on our user page or subsystem page, as appropriate.
- Subsystem page: Your subsystem page should form the main documentation for your work over the term. It should contain the header information that is common to all subsystem pages, followed by a clear and concise description of your subsystem performance goals, baseline design, operational description and supporting analysis. Your GOTChA chart from Fall 2010 should be included in a section labelled "Fall 2010 GOTChA" (this can go anyplace on the page).
- This page can be written as a group and can use information from the project manual, design schematics and homework sets.
- The most important thing is that this page provide clear documentation of your subsystem, so that someone with suitable background in the subject (the instructors and TAs) can understand what your subsystem does, how it works, and why it will satisfy the metrics for the SD competition.
You do not need to hand in these two sections. Starting no earlier than 5 pm on 10 December, we will print out your user page, your subsystem page(s) and then grade these as your final report.